No Products in the Cart
Enhance the aesthetic appeal of your surfaces with the Lava 20 Dark Grey Top Coat, specially designed for application over the main Lava 20 Liquid Rubber Waterproofing Membrane. This one-component, deep-penetrating solution offers a decorative and color-stable finish.
Optional Finish Coating Can be Used Over the Lava 20 System Or On It’s Own Over Lava 20 Fast Primer Offering a Wide Range of Aesthetic & Functional Finishes.
USES & BENEFITS
- Long Lasting
- Zero Degradation
- UV Stable
- UV Resistant
- Waterproof
- Great Adhesion
- Durable
- Easy to Clean
- Great Coverage
- Flexible & Breathable
| Chemical Base | One-component, solvent-based, cold curing aliphatic polyurethane |
| Coverage | 0.150 – 0.300 kg/m2 in one or two layers. |
Application Surface Preparation
- Ensure the surface is clean, dry, and free of contaminants. Maximum moisture content: ≤5%.
- Substrate must have a compressive strength ≥25 MPa and a cohesive bond strength ≥1.5 MPa. New concrete must cure for 28 days before membrane application.
- Use a grinding machine to remove old coatings, grease, and debris, and smooth irregularities. Clean thoroughly. For non-concrete substrates, consult technical support.
Waterproofing Membrane Refer to the Product Data Sheet for specific details about the Lava 20 membrane. Top Coat Application
- Mix Lava 20 Coloured Top Coat well for consistency.
- Use a roller, brush, or airless spray to apply in 1–2 layers.
- Wait 3–6 hours between layers, no more than 36 hours.
- Apply at 5°C–35°C. Avoid high humidity, which may affect curing.
- Optional: Sprinkle flakes/ quartz on the wet top coat for flake flooring systems
For more information please contact the team at Dermot Kehoe's, Homevalue.
This product is available for local/nationwide delivery.
