No Products in the Cart
+353 051420088
Mon - Fri: 8:00 - 5:00 pm
Sat: 8:30 - 5:00 pm
DESCRIPTION
Blowerproof airtight liquid membrane is now BBA certified, used widely across Europe because of its ability to reach unrivalled levels of airtightness. Blowerproof is used to reach Passive Standard 0.6 AC/h in buildings but can reach 0.2 AC/h if required.
WALL TO CEILING JUNCTION
The wall to ceiling junctions on all floorlevels along the outer skin of a house or building need to be made airtight.
WINDOW JAMBS
Fill gaps between the window frame and the wall with PU foam and cut off excess then brush on Blowerproof for airtight seal.
WALLS
Fill gaps between the window frame and the wall with PU foam and cut off excess then brush on Blowerproof for airtight seal.
FLOOR TO WALL JUNCTION
APPLICATION OF PAINT-ON
- AINT-ONBLOWERPROOF LIQUID BRUSH is ready-to-use; stir before use. Do not dilute with water or solvents.
- Apply with a flat paintbrush, suitable for water-based paints. BLOWERPROOF LIQUID BRUSH can also be applied in one layer, total advised indicative consumption: 0.5 - 1 kg/m2.
- Clean paint brush and other tools with water.
- During drying avoid contact with any type of water, liquids or other construction products.
- Complete drying is required prior to applying another product on BLOWERPROOF LIQUID BRUSH (such as plaster).
- Drying time may vary and depends on local conditions and condition of the substrate. Indicative: 24 - 48 hours.
