Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock

1KG GREY SOUDAGUM HYDRO - 800744

€25.99

DESCRIPTION

The Soudagum Hydro kit, contains two foil bags of 500g Soudagum Hydro, application brush, small reinforcing non-woven fleece (15cm x 30cm) and a pair of disposable gloves. The solvent-free protective waterproof coating is suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks. Soudatextile should be applied between two layers of the liquid coating.

Featured properties

Ready to use, single-component waterproof coating
Solvent and Isocyanate free
Excellent workability, can be applied in 2 layers
Rain resistant 2 hours after application
Excellent ahesion on most common substrates
Good weather resistance
Limited UV resistance
Paintable

Applications

Sealing of skylights, dome lights, pipe collars, wall breakthroughs, …
Sealing of cracks in roofs and walls
Sealing of indoor and outdoor joints
Short term repairs of metal and plastic roof gutters and drainage
Short term repair and renovation of rooftops (pans, slats, zinc), roof edges and chimney flashings
For protection and renovation of wood constructions such as verandas, terraces, garden poles, underground garden wood…
Sealing of flower boxes and the outside of fountains and water ornaments
Not recommended for applications which are permanently immersed in water

Instructions

Surfaces must be free of dust and grease. Remove all traces of loose existing coating material. Stir Soudagum Hydro in the container before using. Apply by roller or brush in 2 layers to a thickness of 2mm. The second layer cannot be applied until the first has dried completely. The membrane can be reinforced with a non-woven fleece (Soudatextile). If so, it’s recommended to be used between two coats. The fleece should be submerged into the first coat while it is still wet.